How to Calibrate Your Swagtron Hoverboard

If you’re having trouble with your Swagtron Hoverboard, one of the first things you should try is recalibrating it. This process is simple and only takes a few minutes.

First, make sure that your hoverboard is turned off. Then, press and hold the power button for three seconds. Next, press and release the power button quickly three times. You should see a red light and a green light blink alternately.

At this point, you can release the power button. To begin the calibration process, simply place your hoverboard on a level surface and wait for the green light to stay lit steadily. Once it does, your hoverboard is calibrated and ready to ride!

Tips for calibrating your Swagtron Hoverboard

Before you can start using your Swagtron, you need to calibrate it. Calibrating ensures that your Swagtron is properly balanced and responsive. Follow these steps to calibrate your Swagtron:

1. First, make sure that your Swagtron is turned off.

2. Then, place the Swagtron on a level surface.

3. Next, press and hold the power button for 3 seconds.

4. You will see a green light on the back of the Swagtron indicating that it is in calibration mode.

5. To begin calibration, simply lean forward until the front lights turn on.

6. Then lean back until the rear lights turn on.

7. Finally,centered yourself on the Swagtron so that both front and rear lights are illuminated. This indicates that your Swagtron is calibrated and ready to use!

What to do if your Swagtron Hoverboard won’t calibrate

If you’re having trouble with your Swagtron Hoverboard, one potential issue could be that it needs to be calibrated. This is a pretty easy process, but it’s important to follow the instructions carefully so that you don’t damage your board.

Here’s what you’ll need to do:

1. First, make sure that your hoverboard is turned off.
2. Next, press and hold the “power” button for 3 seconds.
3. Then, press and hold the “brake” button for 3 seconds.
4. release both buttons and wait for the lights on the hoverboard to flash. this indicates that the calibration process has begun.
5. Finally, ride the hoverboard for 30 seconds or until the lights stop flashing. this will complete the calibration process.

If you’re still having trouble with your hoverboard after following these steps, please Contact Swagtron customer support for further assistance.

How often you should calibrate your Swagtron Hoverboard

Most people don’t realize that their Swagtron Hoverboard needs to be calibrated from time to time in order to maintain peak performance. Depending on how often you ride, you should calibrate your board every few months.

To calibrate your Swagtron Hoverboard, start by turning it on and bringing it up to full speed. Then, quickly turn the board off and wait 30 seconds. Turn the board back on and ride for 3 minutes without stopping. After 3 minutes, turn the board off and wait another 30 seconds. Finally, turn the board back on and ride for another 3 minutes.

The benefits of calibrating your Swagtron Hoverboard

Although some may see calibrating a Swagtron Hoverboard as an unnecessary step, doing so can actually provide a number of benefits. For one, it can help to improve the accuracy of the board’s sensors, which in turn can make it easier to control. Calibrating also helps to ensure that the board is able to safely stop when necessary, and it can also help to extend the overall lifespan of the device.

Troubleshooting calibration issues with your Swagtron Hoverboard

If you’re having trouble with your Swagtron Hoverboard, one of the first things you should check is the calibration. Incorrect calibration can cause balance and riding issues, so it’s important to make sure it’s done correctly. Here’s a quick guide on how to calibrate your Swagtron Hoverboard.

First, make sure that your Swagtron Hoverboard is turned off and in a level location. Then, press and hold the power button for 3 seconds to turn on the hoverboard. Once it’s on, step onto the hoverboard and stand in the middle of the footpads.

Next, press and hold the power button for 5 seconds to enter calibration mode. The LED lights on the hoverboard will start flashing, and you’ll hear a beeping sound. Keep your feet in the middle of the footpads and do not move until the LED lights stop flashing and the beeping sound stops. This means that your hoverboard is now calibrated!

FAQs about calibrating your Swagtron Hoverboard

calibrate your Swagtron Hoverboard?

Q: Why do I need to calibrate my Swagtron Hoverboard?
A: You may need to calibrate your Swagtron Hoverboard if it is not maintaining balance or is not performing as well as it used to.

Q: How often should I calibrate my Swagtron Hoverboard?
A: We recommend that you calibrate your Swagtron Hoverboard every few months, or as needed.

Q: What do I need to calibrate my Swagtron Hoverboard?
A: All you need to calibrate your Swagtron Hoverboard is a level surface, such as a sidewalk or driveway.

Q: How do I calibrate my Swagtron Hoverboard?
A: To calibrate your Swagtron Hoverboard, first power on your hoverboard and then place it on a level surface. Once the hoverboard is on a level surface, press and hold the “Calibrate” button for 3 seconds. The LED lights on the hoverboard will flash to indicate that the calibration process has begun. Once the calibration process is complete, the LED lights will stop flashing and remain solid.

How to contact Swagtron customer service

If you experience any issues with your Swagtron hoverboard, please contact our customer service department at 1-888-GO-SWAG (1-888-467-9244). Our team is available Monday through Friday from 8:30am to 5:00pm EST.

How to Calibrate Your Swagtron Hoverboard

Why you need to calibrate your Swagtron Hoverboard

How to know if your Swagtron Hoverboard needs to be calibrated